<div align="center">Coats 1250 Wheelbalancer</div>
Coats 1250 Wheel Balancer

The Coats 1250 Model is the culmination of Coats LED wheel balancer technology and then some.
Coats took the most popular features from past models and added increased capacity and capability, PLUS Laser Guided Operation to this proven balancing chassis.
Speed. Durability. Dependability. Repeatability. Coats delivers them all.


img LED display operators provide needed information for all 8 balancing modes. Simultaneous display of static and dynamic data identifies excess residualstatic imbalance. Easy toread position indicators. Integrated VFD display providesthe operator step-by-stepinstruction through the balancing process.
img Laser Guidance eliminates error by displaying exact Tape-A-Weight placement and behind the spoke weight placement locations.
img Automatic offset and diameter measurement with manual control backups.
img Five second (avg) balancing cycle begins when you lower the hood.
img Static, dynamic, four alloy options, behind the spoke (onall modes with inside weight), plus patch balance.
img Can be ordered in 28mm or 40mm configurations.
img No belts to slip or pulleys to wear out.
img Wheel balancing weights bin is laid out logically so the weights you use most are right at your fingertips.

Key Features
  • Laser Guided Operation eliminates error by displaying exact Tape-A-Weight placement and behind the spoke locations of wheel balancing weights.
  • Control Panel with easy to read position indicators and an integrated VFD display delivers ease of use & promote proper balancing techniques.
  • Direct Select any of eight balancing modes offering several alloy options, plus patch balance.
  • Simultaneous display
    of static & dynamic
    data identifies any
    excess residual static
  • Easy Behind the Spoke Weight Placement helps maintain a “clean” look on custom wheels.
  • 1.5 HP Direct Drive Motor delivers longevity with no belts to slip or pulleys to wear out.
  • Automatic offset and diameter data entry
    increases productivity and provides accuracy for single spin balances .
  • Direct TAW Placement and Laser Guided Operation eliminates guesswork, resulting in 1-spin TAW balances.

Balancing Modes 8
Tyre Diameter Up to 44"
Rim Width 2" to 20 "
Max. Tyre Weight 160 lbs.
Shaft Diameter 28mm or 40mm (via selected accessory kit)
Shaft Length 8-5/8"
Resolution: Oz. 0.01
Resolution: Degrees 1.4
Accuracy: Oz. 0.01
Power Requirement 220v 1Phz.
440v 3Phz.
Footprint 57"W x 50"D
Shipping Weight 625lbs.


[Coats 950] [Coats Wheelbalancer Index][Coats 1250DV ][Coats Index]

Need some advice? Contact: [info@agequipment.co.uk]

Please Click The Button If You Cannot See Menu On the Left hand Side

Site©Automotive Garage Equipment