Coats 1250DV Wheel Balancer
|Embedded LCD Flat-Screen with Keypad Total Technician Training with life-like animation. Allows technician to watch, then follow steps for accuracy. Multioperator feature holds two pre-sets across eight balancing modes.|
|Direct Drive™ Extremely fast and durable 1.5 HP Direct Drive Motor. No belts to slip, no pulleys to wear out.|
|3-D Auto Data Entry Automatic offset and diameter measurement with manual control backups. The hood Sonar calculates third data parameter (width) automatically.|
|Static on Screen™ Static and dynamic data identifies excess residual static imbalance.|
|EB™ Balancing Mode Eliminates the static imbalance, then calculates the least weight needed to bring dynamic within acceptable limits. The result is less weight consumption costs.|
|Laser Guided Operation™ Eliminates error by displaying exact Tape-A-Weight placement and behind the spoke weight placement locations.|
|Auto Start Hood Five second (avg) balancing cycle begins when you lower the hood.|
|8 Balancing Modes Static, dynamic, four alloy options, behind the spoke (on all modes with inside weight), plus patch balance.|
|Removable Shaft Can be ordered in 28mm or 40mm configurations.|
|Weight Storage System Weight bin is laid out logically so the weights you use most are right at your fingertips.|
LCD Flat-Screen and On-Board Training
Coats provides more than balancing equipment. We offer total balancing solutions that give you minimum downtime, maximum productivity, and years of dependable service. Plus a complete collection of accessories to make sure the balancer you purchase today is still your primary shop tool years down the road.
The Coats 1250-3DV is an extremely fast,
Designed for front line, high volume shop duty, the 1250-3DV is packed with features to save you time at every turn. From the LCD flat-screen with keypad and on-board training to the dual operator feature and integrated behind the spoke capability, now it’s easier than ever to handle all your balancing needs.
|Commercial Grade LCD Flat-Screen w/Keypad
User-friendly, life-like animation guides technicians step by step.
|Laser Guided Operation™
Pinpoints accurate Tape-A-Weight placements.
Calculates tire width measurement automatically.
|Static on Screen™ Display
Simultaneous display of static and dynamic data identifies any excess residual static imbalance.
Direct Drive uses the motor’s main shaft, not extra pulleys or belts that wear or slip. This superior system reaches balancing speed quickly, then coasts during measurements. The result is a faster cycle time without component “noise” that can result in balancing errors.
|EB™ Balancing Mode
Coats’ exclusive EB Mode results in the use of less corrective weight. Also, there is a productivity savings by reducing the number of “re-spins” required to achieve an acceptable balance.
|Tyre Diameter||8” to 30”|
|Rim Width||2" to 20 "|
|Maximum Tyre Diameter||Up to 44”|
|Max. Tyre Weight.||160 lbs.|
|Shaft Diameter||28mm or 40mm|
|Resolution (Round Off Mode)||0.25oz, position .70|
|Power Requirement||220v 1Phz.
|Footprint||57"W x 50"D|
[Coats 1250] [Coats Wheelbalancer Index][Coats 700][Coats Index]
Need some advice? Contact: [email@example.com]
Please Click The Button If You Cannot See Menu On the
Left hand Side