Fasep B212
fasep
tyre changersalignersmanufacturersmobilecommercialmotorcyclemotorsportadaptorsserviceofferssecind handhome

BALATRON B210 G2

b210

B210 Nano - Hand Spin. The portable ultra compact.
With an ultra compact design and its hand spin technology, B210 offers the basic features for a safe and accurate wheel balancing in any place. 12 Volt power supply is enough. Space requirements are set to a minimum with a possibility to include all special features and options to balance any type of wheel to perfection.

User friendly technology. Ready for the future !
Based on an modern 16-bit microprocessor, accuracy, speed and special functions (SPLIT, ALU-SE, MARS, AFC, OPT, DUAL-OP, ASF) are all available (see table for availability on selected models).
The 3D control panel allows to work intuitively since the beginning. Few push-buttons let you choose all functions most easily.
Flash memory technology allows to upgrade software in seconds, by just connecting the balancer to a PC. This feature lets you take advantage of our continuous technical developments and make sure your product is never outdated!

Minimized space requirements
A compact base for an elegant and innovative console, with 6 compartments for weights and tools and built-in place for 3 cones. Flanges can be placed laterally on the wheel balancer: 4 flange holders are provided.
A modern design that cares for space requirements first.

Precision mechanics.
The heart of the balancer is built around the VQI 3-sensor system, a FASEP exclusive design, and with IFS system (integrated-flange shaft) for maximum centering accuracy.
It also comes with the new shaft 2003, allowing larger tires and rims and designed to work easily on wheels where adhesive weights are required, with a larger access to the inside of the rim, more then any other competitor.


16bit
256
98rpm
zn
 

Technical data
Power source
12V (local power source 220V supplied series)
Absorbed power
5 Watt
Balancing speed
75-125 RPM
Rim Diameter
8" (200 mm) - 26" (650 mm)
Rim Diameter (alu-s)
8" - 23"
Wheel Diameter (max)
34" (850 mm)
Wheel width (max)
16" (415 mm)
Wheel weight (max)
75 Kg (166 Lbs)
Measuring time
4 - 15 s.
Precision
1 gr. (0.05 oz)
Noise
< 70 dB (A)

Functions
 
B210.G2
B212.G2
B221.G2
B306.G2
Hardware Features
Weight compartments
6
6
6+1
7+1
Cone compartments
Yes
Yes
no
yes
Flange supports
4
4
4
6
Wheel data input - IN
Automatic input of distance and diameter
opt
opt
opt
opt
Wheel data input - OUT
Automatic input of width
no
no
no
opt
Foot lock pedal
to ease locking-unlocking of flanges and application of weights
no
yes
yes
yes
Software functions (standard = Level 1)
Unit of measure
mm / inches (user setup)
Yes
Yes
Yes
Yes
START-STOP
Automatic
na
Yes
Yes
Yes
Display step
1 / 5 gr (user setup)
Yes
Yes
Yes
Yes
Display cut-off
1..9 gr (user setup)
Yes
Yes
Yes
Yes
Stop-on-top
at the end of measuring run, wheel is stopped with point of application of weight placed at 12 o'clock 
na
Yes
Yes
Yes
Autodiagnostic
a great number of malfunctions or user mistakes in procedure are detected
Yes
Yes
Yes
Yes
Autocalibration
sensor calibration can be easily performed by the user
Yes
Yes
Yes
Yes
SPLIT
to divide the balance weight and place them in a the desired position (usually hidden behind the spokes, non-visible)
Yes
Yes
Yes
Yes
Statistics
total number of spins, the % of success, the % for each diameter
Yes
Yes
Yes
Yes
FCC Fast Calibration Check
Yes
Yes
Yes
Yes
ALU-S
allows to measure and enter the exact position of adhesive weights to be placed on alloy rims
Yes
Yes
Yes
Yes
ALU-SE ALU-S Electronic
allows to enter measurements automatically and find automatically the exact position of adhesive weights to be placed on alloy rims
opt
opt
opt
opt
MARS Automatic Minimization of Residual Static Unbalance
allows to reduce the static unbalance left, due to rounding when using weights multiple of 5 grams.
Yes
Yes
Yes
Yes
Software functions (Level 2)
Optimization Tyre Matching (LEVEL2)
Static (tyre rotation)
opt
Yes
Yes
Yes
AFC Automatic Flange Calibration (LEVEL2)
allows to use even non-balanced flanges (dirty, worn, etc.)
opt
Yes
Yes
Yes
DUAL-OP Double Operator (LEVEL2)
Two users can share the unit at the same time independently
opt
Yes
Yes
Yes
Software functions (Level 3)
ASF ALU Special Functions (LEVEL3)
Allows to place adhesive weights at 6 o'clock and other useful functions.
opt
opt
opt
opt
APS Automatic Positioning System (LEVEL3)
Allows to move wheel automatically to inside/outside position for application of the balancing weight.
na
opt
opt
opt
FAST Fast balancing mode (LEVEL3)
Allows to measure wheel unbalance in half time (for when you have peak-hours time/periods).
na
opt
opt
opt
LEVEL2 = this option is included with Activation of LEVEL2
LEVEL3 = this option is included with Activation of LEVEL3

Optional functions and accessories
Wheelguard wheel cover is optional as balancer runs at low speed
ALU-SE Allows to measure and enter the exact position of adhesive weight automatically

Dimensions
sizes
Packing (mm)
 
A
B
C
B210.G2
900
500
1120
Weight (kg)
 
Gross
Nett
B210.G2
60
49
Dimensions (mm)
 
L
W
H
B210.G2
1110
510
990

BALATRON Series - digital wheel balancers - compact
b110
b210
shorty
212
221

BALATRON Series - digital wheel balancers - Heavy Duty
b306
b331
b431
b441

VIDEOTRONIC Series - video wheel balancers - Heavy Duty
v540
v555
v585
v643
v653

Need some advice? Contact: [info@agequipment.co.uk]
[Please click here to return to the welcome page]

Site©Automotive Garage Equipment