Fasep B441 tilt
fasep
tyre changersalignersmanufacturersmobilecommercialmotorcyclemotorsportadaptorsserviceofferssecind handhome

BALATRON B441 G2 Tilt

441

B441 Tilt. Tilt your point of view.
Designed for the tyre specialists with heavy peak jobs, B441.G2 offers maximum performances for wheel balancing, thanks to its innovative contents. B441.G2 is built around its Tilting Shaft System but it also offers a bunch of automatic features to improve accuracy and speed up the wheel balancing process.

b441

A unique advantage: Tilt-system and horizontal mounting.
Centering the wheel perfectly and with no efforts becomes easy and minimizes come-backs!
On any normal wheel balancer, mounting the wheel needs a lot of attention by the operator, as centering the wheel is a critical operation in the whole balancing process. Proper centering is affected by the weight of the wheel and fatigue of the operator.
The Tilt-system of this balancer allows a wheel to be mounted horizontally on the wheel balancer, so that centering is always perfect, regardless of operator training, skill and fatigue.

User friendly technology. Ready for the future !
Based on an modern 16-bit microprocessor, accuracy, speed and special functions (SPLIT, ALU-SE, MARS, AFC, OPT, DUAL-OP, ASF) are all available (see table for availability on selected models).
The 3D control panel allows to work intuitively since the beginning. Few push-buttons let you choose all functions most easily.
Flash memory technology allows to upgrade software in seconds, by just connecting the balancer to a PC. This feature lets you take advantage of our continuous technical developments and make sure your product is never outdated!

Designed for top performances.
A base with four weights compartments, one compartment for tools (pliers, etc.). Weight tray also offers place for standard cones. Flanges can be placed laterally on the wheel balancer: six flange holders are provided.
Extra space for weights (9 trays) is provided on the back-mount weights-holder, which also offers an extra space for 7 cones/adapters. 
The wheelguard with a new design reduces opening efforts and minimize space requirements dramatically.

Precision mechanics.
The heart of the balancer is built around the VQI 3-sensor system, a FASEP exclusive design, and with IFS system (integrated-flange shaft) for maximum centering accuracy.
It also comes with the new shaft 2003, allowing larger tires and rims and designed to work easily on wheels where adhesive weights are required, with a larger access to the inside of the rim, more then any other competitor.

Built to last (as strong as it looks!).
Every detail is designed and tested to grant long time of good working quality.
The Heavy Duty shaft allows 90kg of maximum weight on the shaft, a record unsurpassed. No competitor's product can match it.
Bigger and tougher then any other competitor's product !

Full Automatic input system
The machine is equipped with Automatic Distance/Diameter Input (option A) and Automatic Width Input (option D).
With Automatic Distance/Diameter, also ALU-SE function (automatic input of wheel data and adhesive weight application system) is available to improve productivity when balancing wheel with stick-on weights.
Balance wheels perfectly with stick-on weights at first spin using ALU-SE!
AUTO-SELECT mode (for automatic balancing mode selection) available on selected model configurations.

Special options to maximize your productivity.
The PneuLock system allow a complete balancing cycle much faster compared to manual wheel locking, and at the same time it allows a more precise wheel centering.
The Laser System delivers an accurate and fast job also in the case of balancing with stick-on weights.
No more approximate ALU1.2.3.4 programs: 0-0 to the first spin assured with stick-on weights too!


16bit
256
98rpm
90kg
zn tilt
Tips
Mounting the wheel horizontally, instead of vertically by side, is a good choice also if you think that the wheel to be balanced has usually just been fitted on a tyre changer, where it also laid in horizontal position. B441.G2 is ideal then when it is located near the tyre changer and at the end of a tyre mounting line like those manufactured by [Ahcon] for example.
 

Technical data
Power source
220V 50-60Hz 1Ph
Motor power
50W
Power requirement
100 Watt
Balancing speed
98 RPM
Rim Diameter
8" (200 mm) - 26" (650 mm)
Rim Diameter (alu-s)
8" - 23"
Wheel Diameter (max)
with wheel guard
34" (850 mm)
Wheel width (max)
with wheel guard
16" (415 mm)
Wheel weight (max)
90 Kg (198 Lbs)
Measuring time
4 - 15 s.
Resolution
1 gr. (0.05 oz)
Angular accuracy
256 positions (accuracy = 1,4 deg)
Display
LED
Noise
< 70 dB (A)

Versions
Product Code Type
Description
E549.001 B441.G2.DA 1Ph motor version

Functions
 
B306.G2
B331.G2
B431.G2
B441.G2.DA
Hardware Features
Weight compartments
7+1
9
15
13
Cone compartments
no
no
3+4
3+4
Flange supports
6
4
6+3
6+3
Wheel data input - IN
Automatic input of distance and diameter
opt
opt
yes
yes
Wheel data input - OUT
Automatic input of width
opt
opt
yes
yes
Foot lock pedal
to ease locking-unlocking of flanges and application of weights
yes
yes
yes
yes
Software functions (standard = Level 1)
Unit of measure
mm / inches (user setup)
Yes
Yes
Yes
Yes
START-STOP
Automatic
Yes
Yes
Yes
Yes
Display step
1 / 5 gr (user setup)
Yes
Yes
Yes
Yes
Display cut-off
1..9 gr (user setup)
Yes
Yes
Yes
Yes
Stop-on-top
at the end of measuring run, wheel is stopped with point of application of weight placed at 12 o'clock 
Yes
Yes
Yes
Yes
Autodiagnostic
a great number of malfunctions or user mistakes in procedure are detected
Yes
Yes
Yes
Yes
Autocalibration
sensor calibration can be easily performed by the user
Yes
Yes
Yes
Yes
SPLIT
to divide the balance weight and place them in a the desired position (usually hidden behind the spokes, non-visible)
Yes
Yes
Yes
Yes
Statistics
total number of spins, the % of success, the % for each diameter
Yes
Yes
Yes
Yes
FCC Fast Calibration Check
Yes
Yes
Yes
Yes
ALU-S
allows to measure and enter the exact position of adhesive weights to be placed on alloy rims
Yes
Yes
Yes
Yes
ALU-SE ALU-S Electronic
allows to enter measurements automatically and find automatically the exact position of adhesive weights to be placed on alloy rims
opt
opt
yes
yes
MARS Automatic Minimization of Residual Static Unbalance
allows to reduce the static unbalance left, due to rounding when using weights multiple of 5 grams.
Yes
Yes
Yes
Yes
Software functions (Level 2)
Optimization Tyre Matching (LEVEL2)
Static (tyre rotation)
yes
Yes
Yes
Yes
AFC Automatic Flange Calibration (LEVEL2)
allows to use even non-balanced flanges (dirty, worn, etc.)
yes
Yes
Yes
Yes
DUAL-OP Double Operator (LEVEL2)
Two users can share the unit at the same time independently
yes
Yes
Yes
Yes
Software functions (Level 3)
ASF ALU Special Functions (LEVEL3)
Allows to place adhesive weights at 6 o'clock and other useful functions.
opt
opt
opt
yes
APS Automatic Positioning System (LEVEL3)
Allows to move wheel automatically to inside/outside position for application of the balancing weight.
opt
opt
opt
yes
FAST Fast balancing mode (LEVEL3)
Allows to measure wheel unbalance in half time (for when you have peak-hours time/periods).
opt
opt
opt
yes
AUTOSELECT (LEVEL3)
Automatic selection of balancing mode (dynamic, alu-s1, alu-s2) by simply entering the wheel dimensions
opt
opt
opt
yes
LEVEL2 = this option is included with Activation of LEVEL2
LEVEL3 = this option is included with Activation of LEVEL3

Dimensions
441
sizes
Packing (mm)
 
A
B
C
B441.G2
1230
1030
1640

B441.G2
compact box (*)

1130
760
1120
Weight (kg)
 
Gross
Nett
 
B441.G2
173
143
 
Dimensions (mm)
 
L
W
H
B441.G2
1180
960
1380

BALATRON Series - digital wheel balancers - compact
b110
b210
shorty
212
221

BALATRON Series - digital wheel balancers - Heavy Duty
b306
b331
b431
b441

VIDEOTRONIC Series - video wheel balancers - Heavy Duty
v540
v555
v585
v643
v653

Need some advice? Contact: [info@agequipment.co.uk]
[Please click here to return to the welcome page]

Site©Automotive Garage Equipment