Fasep V540
fasep
tyre changersalignersmanufacturersmobilecommercialmotorcyclemotorsportadaptorsserviceofferssecind handhome

Videotronic V540 Nuvi

V540

V540 Nuvi
The new generation of compact video balancers.
V540 is the video wheel balancer where you get all that is needed and no frills. V540 incorporates the newest low-speed with 16-bit technology from FASEP like other top range balancers and offers all possibilities to get perfectly balanced tires.

Technologically advanced.
Based on the Videotronic technology, the balancer is controlled by a Personal Computer. The user easily controls all functions through an SVGA 17" LCD monitor: with the use of the graphics and icons, using the wheel balancer is absolutely intuitive.
The software, stored on a Flash memory, can be updated. You can always take advantage of our continuous technical developments and make sure your product is never outdated!

Designed to save space
A base with 9 weights compartments, one compartment for tools (pliers, etc.). Weight tray also offers place for 3 standard cones. Flanges can be placed laterally on the wheel balancer: 4 flange holders are provided.

Precision mechanics.
The heart of the balancer is built around the VQI 3-sensor system, a FASEP exclusive design, and with IFS system (integrated-flange shaft) for maximum centering accuracy.
It also comes with the new shaft 2003, allowing larger tires and rims and designed to work easily on wheels where adhesive weights are required, with a larger access to the inside of the rim, more then any other competitor.

Automatic input systems
The machine is equipped with Automatic Distance/Diameter Input (option A). Automatic Width Input (option D) is optional.
With Automatic Distance/Diameter, also ALU-SE function (automatic input of wheel data and adhesive weight application system) is available to improve productivity when balancing wheel with stick-on weights.
Balance wheels perfectly with stick-on weights at first spin using ALU-SE!


16bit
256
98rpm
75
zn
 

Technical data
Power source
220V 50-60Hz 1Ph
Motor power
50W
Power requirement
400 Watt
Balancing speed
98 RPM
Rim Diameter
8" (200 mm) - 26" (650 mm)
Rim Diameter (alu-s)
8" - 23"
Wheel Diameter (max)
with wheel guard
34" (850 mm)
Wheel width (max)
with wheel guard
16" (415 mm)
Wheel weight (max)
75 Kg (166 Lbs)
Measuring time
4 - 15 s.
Accuracy
1 gr. (0.05 oz)
Angular accuracy
256 positions (accuracy = 1,4 deg)
Display
LCD SVGA 17"

Versions
Product Code Type
Description
E573.002 V540.SA base version, 1Ph motor version
E573.005 V540.A with wheelguard , 1Ph motor version

Functions
 
V540
V555
V585
V643
V653
Hardware Features
Weight + pliers compartments
9+1
9+1
9+1
15+1
19+1
Back mounted weight compartments
no
no
no
yes
yes
Cone compartments
3
3
3
10
9
Flange Supports
4
6
6
6
6
Wheel data input - IN
Automatic input of distance and diameter
yes
yes
yes
yes
yes
Wheel data input - OUT
Automatic input of width
opt
opt
opt
yes
yes
Foot lock pedal
to ease locking-unlocking of flanges and application of weights
yes
yes
yes
yes
no
Foot-pedal / Electro-magnetic brake
It locks the motors electrically to ease locking-unlocking of flanges and application of weights
no
opt
opt
opt
yes
Easy-alu" trapezoidal basement
allows a better access for application of adhesive weights.
no
yes
yes
yes
no
Software functions (standard = Level 1)
Unit of measure
mm / inches (user setup)
yes
yes
yes
yes
yes
START-STOP
Automatic when closing the Wheel guard (user setup)
yes
yes
yes
yes
yes
Display step
1 / 5 gr (user setup)
yes
yes
yes
yes
yes
Display cut-off
1..9 gr (user setup)
yes
yes
yes
yes
yes
Stop-on-top
at the end of measuring run, wheel is stopped with point of application of weight placed at 12 o'clock 
opt
only 1ph
only 1ph
only 1ph
only 1ph
Autodiagnostic
a great number of malfunctions or user mistakes in procedure are detected
yes
yes
yes
yes
yes
Autocalibration
sensor calibration can be easily performed by the user
yes
yes
yes
yes
yes
SPLIT
Possibility to divide the balance weight and hide behind the spokes in a non-visible position
yes
yes
yes
yes
yes
Statistics
total number of spins, the % of success, the % for each diameter
yes
yes
yes
yes
yes
FCC Fast Calibration Check
yes
yes
yes
yes
yes
Rim Databank
List of standard tyre measures (width - diameter) selectable for quick input
yes
yes
yes
yes
yes
ALU-S
allows to measure and enter the exact position of adhesive weights to be placed on alloy rims
yes
yes
yes
yes
yes
ALU-SE ALU-S Electronic
allows to enter measurements automatically and find automatically the exact position of adhesive weights to be placed on alloy rims
yes
yes
yes
yes
yes
Information Center - tele-diagnostic
display the technical configuration and status of sensors, and allow  to configure and personalize the way the balancer works.
yes
yes
yes
yes
yes
MARS Automatic Minimization of Residual Static Unbalance
allows to reduce the static unbalance left, due to rounding when using weights multiple of 5 grams.
yes
yes
yes
yes
yes
Software functions (Level 2)
Optimization Tyre Matching (LEVEL2)
Static (tyre rotation)
yes
yes
yes
yes
yes
Rim run-out 
check geometric rotundity / eccentricity of the rim
yes
yes
yes
yes
yes
Planarity
check geometric planarity of the rim
yes
yes
yes
yes
yes
AFC Automatic Flange Calibration (LEVEL2)
allows to use even non-balanced flanges (dirty, worn, etc.)
yes
yes
yes
yes
 
Software functions (Level 3)
ASF ALU Special Functions (LEVEL3)
Allows to place adhesive weights at 6 o'clock and other useful functions.
opt
opt
opt
opt
opt
APS Automatic Positioning System (LEVEL3)
Allows to move wheel automatically to inside/outside position for application of the balancing weight.
opt
opt
opt
opt
opt
FAST Fast balancing mode (LEVEL3)
Allows to measure wheel unbalance in half time (for when you have peak-hours time/periods).
opt
opt
opt
opt
opt
LEVEL2 = this option is included with Activation of LEVEL2
LEVEL3 = this option is included with Activation of LEVEL3

Optional Functions
 
V540
V555
V585
V643
PRN
Printer 24-columns 
no
no
yes
no
ALU-SE
Device to measure and apply adhesive weights.
included
included
included
included
laserLaser pointing device to apply adhesive weights.
no
yes
yes
yes

Dimensions
540
sizes
Packing (mm)
 
A
B
C
V540
1130
760
1120
Weight (kg)
 
Gross
Net
 
V540
140
116
 
Dimensions (mm)
 
L
W
H
V540
1120
950
1500

BALATRON Series - digital wheel balancers - compact
b110
b210
shorty
212
221

BALATRON Series - digital wheel balancers - Heavy Duty
b306
b331
b431
b441

VIDEOTRONIC Series - video wheel balancers - Heavy Duty
v540
v555
v585
v643
v653

Need some advice? Contact: [info@agequipment.co.uk]
[Please click here to return to the welcome page]

Site©Automotive Garage Equipment